http://www.ice-loong.com
Home > Video > Video Dispaly

Video dispaly

  • COLD FORGING AND SOLENOID VALVE

    2019-05-21

    This is Jack Lee from Juwei Machinery Co., Ltd, and we have 20 years’ experience in machining the solenoid valve parts, bodies and covers, glad to have an opportunity to cooperate with you, if any inquires, please feel free to contact with me: mobile: 0086 15753963153

  • LS1324 Valve Replacement

    2019-05-21

    Service repair instructions for replacing the 4mm Solenoid Valve on the Ossian LS®

  • Alex Duetto “beautiful” replacement solenoid valve – test

    2019-05-21

  • How to get FLEECE CHEETAH TURBO for HALF PRICE

    2019-05-21

    Please watch: “How to SET WASTEGATE on HX36 TURBO (Turbosmart IWG75)” –~– How to get FLEECE CHEETAH TURBO for HALF PRICE! Ok, so maybe not the exact Fleece Cheetah turbo from Fleece Performance, but in this video I will go over some things that you can do for a turbo upgrade on your 24 valve Cummins truck and have a cheetah turbo. A cheetah is a turbo that is in stock form as far as the compressor housing and exhaust housing go, but both housings have been machined out to accept larger compressor wheel and turbine thus giving you a performance turbo on your diesel truck that appears to be a stock turbo. Fleece Performance makes their cheetahs 63mm on the compressor wheel side, and the beauty of a cheetah is that it still matches up decently with stock fueling due to the fact that it is still the stock size compressor/exhaust housings but because they’ve been machined out and have larger wheels in them the cheetah can also handle bigger injectors and feed the truck enough air to burn that extra fuel efficiently. The HX35 cheetah turbo is what I am going to build for my 24 valve Cummins with the Turbosmart wastegate that is preset to 26 psi and I will have an adjustable boost elbow on the turbo that will allow me to turn the boost up and down until I find a good match for my 2nd gen cummins and the mods done to it. Hopefully this helped somebody out who is looking to do a turbo upgrade on their truck but doesn’t want to spend $1800 for something that they can easily put together for far less money! This is the best hx35 turbo upgrade you can do for your 2nd gen 24 valve Cummins without breaking the bank in my mind.SUBSCRIBE for more truck content. LIKING the videos will help greatly with search results and to get the channel recommended to others!Here is a list of parts that I use on my 01 24 Valve Cummins:XD Misfit Rims: Goodyear Duratracs: Exhaust: Governor Solenoid/ Filter Kit: Big Honkin : Mopar Oil Filter: Rotella 15w40 Oil: Rotella 5w40 Oil: Auxbeam f-16 L.E.D. head lights: L.E.D. Reverse Lights: Auxbeam 3′ L.E.D. Pods: Donaldson Filters: BD Diesel Noise Isolator: Interior LED bulbs: Smoked Cab Lights: 3m Stripe Off Wheel: Grille Emblem: Door Badges Bilstein 5100 Shocks: Water Pump: *above links are affiliate links to help the channel grow!*For Updates FOLLOW me here:INSTAGRAM: @JOSHUAROBERT19MUSIC:EMAIL: keywords: cummins, dodge cummins, 24 valve cummins, 12 valve cummins, 47re, turbo diesel, 2nd gen cummins, 3rd gen cummins, 4th gen cummins, 5.9l cummins, 1st gen cummins, diesel trucks, 6bt, hx35, hy35, s300, s400, turbo, turbo spool, hx35/hx40 hybrid, 24v, 12v, rolling coal, duramax, powerstroke, cummins tow rig, cummins towing,

  • 20151120 Jenhorng / Eaglesky company’s video

    2019-05-21

    Jenhorng/Eaglesky plant, we do manufacture electric actuators, pneumatic actuators, double/triple eccentric high performance butterfly valve, straight shaft butterfly valves, stainless steel valves, and solenoid valves.

  • Automated Greenhouse

    2019-05-21

    The environmental conditions should be maintained in appropriate level to obtain maximum yield from the crop. Traditionally, farmers are using manual processes to maintain better conditions for their crop. These processes are consuming more time and man power. Because of that automated conditions control system is proposed to maximize the yield by maintaining best conditions for the crop. By implementing this project the environmental conditions can be controlled automatically inside of the greenhouse to provide a superior growing environment for the specific plant species. The various data about the growing environment are measured by sensors, transmit as inputs to the Arduino and process these data to start functioning of the output component such as heating fan, cooling fan, and electric solenoid valve etc. This system is capable to controlling temperature, humidity and soil moisture level and soil temperature level automatically to the standard level. Arduino board can be used to process the data and transfer to computer for visualizing purpose. The current situation of the conditions is automatically storing in the Microsoft Excel worksheet by using PLX-DAQ software. This automated greenhouse is best solution to people who are interested for domestic cultivation, Green house cultivation and farmers who are more considerable for the time with the fertile yield from their crop.

  • Ford Explorer 5R55S Harsh Reverse & P0741 TCC Performance Valve Body Replacement

    2019-05-21

    You can buy Mercon V Here- can get the updated solenoid pack Here- can get the nipple refill tool Here- is the Suction Gun I Recommend- is the correct Transmission Fluid Filter- this video I go over valve body replacement in detail and a few of the common problems associated with a bad valve body in this transmission. Body Torque SequenceReverse Servo Torque SequenceSolenoid Pack RemovalFluid Fill & AdjustResetting Learned Values after repairCheck me out on Facebook-

  • How to Remove Idle Air Control Valve/A/C actuator – Nissan VG/VQ Engine. Part 2/5

    2019-05-21

    A brief description of the component mounted below the upper intake plenum manifold on the Nissan VG33E 3300 v6 engine with automatic transmission.The video show the removal and install process for the IACV Idle Air Control Valve and it relate sensors. The video also display the Throttle body FAST-IDLE wax-solenoid and its FAST-IDLE CAM linkage. See video for adjusting FAST IDLE CAM and it thermos solenoid Thanks for your viewership. Please enjoy and share. Best wishes

  • BorgWarner Centrifugal Electro-Hydraulic Actuator

    2019-05-21

    The latest innovation in electro-hydraulic control provides systems with pre-emptive and immediate response. Upgraded axial piston pump with new centrifugal pressure control eliminates need for accumulator and solenoid valve. The CEH Actuator is also a 2012 PACE Award Finalist.

  • 1pcElectric Solenoid Valve Magnetic DC 12V N C Water Air Inlet Flow Switch 1 2

    2019-05-21

    US $3.43 – 1pcElectric Solenoid Valve Magnetic DC 12V N C Water Air Inlet Flow Switch 1 2 Brand Name: SAILFLO Model Number: see information Actuator Mode: Without Manual And Instruction Power Source: DC Port Size: see information Temperature of Media: see information Power: see information Pressure: see information Media: see information Material: Metal plastic Standard or Nonstandard: see information Structure: other

  • Dryer Not Drying? Cycling Thermostat Testing, Troubleshooting

    2019-05-21

    Dryer won’t heat, is too hot, won’t start/stop or not drying clothes? This video demonstrates how to test a cycling thermostat on an electric or gas dryer. The cycling thermostat is a commonly replaced part for a dryer that won’t heat or is taking too long to dry.Other commonly replaced parts for a dryer that won’t heat are:Gas solenoid valve Dryer igniter Heating element Flame sensor High limit thermostat Cycling thermostat Main control board TimerClick here to purchase a replacement dryer cycling thermostat: here to purchase the multimeter used in this part testing video: to disassemble your dryer: more DIY videos including part replacement and help finding your model visit the repair help section of our website: of the information provided in this part testing video is applicable to the following brands: Amana, Frigidaire, GE, Kenmore, LG, Maytag, Roper, Samsung and Whirlpool.RepairClinic has millions of replacement parts for appliances, lawn equipment, power tools, and heating & cooling equipment including washers, dryers, dishwashers, refrigerators, lawn mowers, snowblowers, furnaces, and air conditioners. Our customer care team is available to help by phone or live chat, seven days a week: 1-800-269-2609. We guarantee the fastest shipping possible—all in-stock parts ship the same business day. Return any part for any reason with our generous 365-day return policy.In addition to providing replacement parts, RepairClinic.com offers free online troubleshooting information and DIY repair videos. Use our website to choose from a series of problems to discover the likely causes and the correct replacement part(s) for your particular model. Once you’ve determined the solution, our expertly-produced video tutorials will guide you through every step of the repair.At RepairClinic, we make fixing things easy!Connect With Us! our free VIP email list for discounts and money-saving tips: Check out our blog: ’t forget to like and comment on this video, and subscribe to our channel!

  • High End PWM Solenoid, Valve, Actuators, Motors, and Positioner Driver Using DRV103 IC

    2019-05-21

    Tiny module is a PWM Solenoids and Valves driver using Texas instrument’s DRV103 low-side DMOS power switch employing a pulse-width modulated (PWM) output. Its rugged design is optimized for driving electro-mechanical devices such as valves, solenoids, relays, actuators, motors and positioners. This board is also ideal for driving thermal devices such as heaters, coolers, lamps, PWM operation conserves power and reduces heat rise, resulting in higher reliability. In addition, adjustable PWM allows fine control of power delivered to the load. Output delay time and oscillator frequency are also externally adjustable. Features • Supply 8V to 32V DC • Load Capacity 1.5A • Trigger Input Voltage 1.5V to 5V DC • Thermal and Current Limit Shutdown • On Board Power LEDApplications • Solenoids • Valves, • Heaters, Coolers • Lamps • Relays • Power Contactor Coils • Hydraulics and Pneumatics SystemsNote: PWM Duty Cycle, Output Delay, Frequency Adjust • Oscillator Frequency range 500Hz to 100Khz, default set to 5Khz, Frequency can be alter by changing R4 ( Refer Data sheet for more details) • Delay Output: Default delay set to approx. 100mili seconds, Delay can be adjust by changing Capacitor C1 • Duty Cycle is adjustable 10% to 95% , default set to 95% can be alter by changing R3 (Refer Data sheet for more details)

Communicate with Supplier?Supplier
Jason Ho Mr. Jason Ho
What can I do for you?
Contact Supplier